Tap Replacement in Bald Hills
Tap replacement in Bald Hills calls for a licensed plumber from go to whoa: picking a fitting that suits the basin, checking it against the national standards, then fitting and testing it. We do swaps all over the suburb, and the full list of work we cover across Bald Hills is on the home page. For the wider jobs around basins and loos, see our tap and toilet plumbing service.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
A dripping tap is a different job. Where a worn washer or valve is the fault rather than the whole fitting, our tap repairs page covers that work.
Matching a New Tap to Your Sink or Basin
Two styles dominate: a mixer brings the hot and cold supplies together at a single spout, worked by one lever or a pair of handles, while separate taps keep a spout each. Either way, the replacement has to suit what the sink already has.
Bald Hills runs from weatherboard houses built before 1940 to brick-veneer homes from the 1960s and 1980s, so the old fitting can date from any era.
Before anything gets ordered, the plumber checks three things:
- The hole layout in the sink or basin, since a mixer and a pair of separate taps need different setups.
- Deck or wall mounting. A wall-mounted unit joins pipework inside the wall, so switching between the two changes the wall or the basin as well as the tap.
- The supply connections below, and whether an isolation valve on each line allows one tap to be shut off on its own.
Match those and the swap runs smoothly. Miss one and the basin needs work, not just the tap.
The 9 Litres per Minute Rental Tap Rule
Queensland tenancy rules cap internal cold water taps and single mixer taps in a rental at 9 litres per minute. An owner can only pass the full water bill to the tenant once that limit is met.
The limit is narrower than it sounds:
- It covers cold taps over a hand basin, kitchen sink or laundry trough, mixers included.
- Bathtub taps, garden taps and taps feeding a washing machine or dishwasher sit outside it.
The Residential Tenancies Authority suggests owners hold onto receipts, packaging and plumbing reports as proof the taps pass.
WaterMark and WELS on a New Tap
WaterMark certification is a product-safety tick: it confirms a plumbing product complies with the national plumbing code. WELS, short for Water Efficiency Labelling and Standards, is the scheme that registers a tap for water efficiency and puts its star rating and usage figures on the label.
Both marks are needed before a licensed plumber can lawfully fit a tap. The product has to display the WaterMark trademark and the WELS details, and the WaterMark tick comes first anyway, because WELS registration depends on it.
Buying online, the listing has to display the WaterMark trademark plus the product's specification and its licence number, along with the WELS registration number or registered model name, stars and water use. Both product databases can be checked by model name, so ask the seller for anything missing.
On ratings, Business Queensland sets a minimum 3-star WELS rating for tap fittings and notes the requirements do not apply to renovations.
Tap Washers, Whole Taps and the Licence Line
A tap swap belongs with a licensed plumber in Queensland. The QBCC uses exactly this job as its example of work outside the short list a home owner may do unlicensed.
The only tap job on the QBCC's unregulated list is the washer or jumper valve inside the fitting. Everything else on a tap stays with a licensee.
From there the paperwork splits two ways:
Swapping like for like
replacing an existing tap counts as minor work. A QBCC licensee handles it, and no permit or Form 4 is needed.
A tap in a fresh position
installing a fixture in a new spot in an existing building is notifiable work. The plumber lodges a Form 4 with the QBCC inside 10 business days of finishing.
Rentals add their own rules. A tenant needs written approval from the owner or manager, on a Form 23, before attaching a fixture. Where a tenant fits one without consent, the owner or manager has three choices: call it a breach and work through the dispute, keep the change as an improvement, or take the fitting out and bill the tenant for that cost.
Tap Type, Access and Paperwork Behind the Quote
Several things drive the price of a tap replacement. The tap type comes first, then whether the isolation valves and existing connections are reusable. Whether the holes in the sink or basin suit the new fitting matters too, along with the room to work under the sink.
A tap in a new position adds a Form 4 lodgement fee. The licensed contractor lodges the form and pays the fee, and may pass that cost, including administrative costs, on to the owner.
A batch of swaps in one visit shares the setup time, and the count feeds the quote. You get a fixed quote before any work starts, so the price is settled on paper before a tool comes out.
How We Fit Your New Tap
- 1
Get in touch
Call (07) 3523 6417 or send a quick message about the job in Bald Hills, and we'll ask what we need to know.
- 2
Check the old tap and the holes
We look at the existing tap, the hole layout in your sink or basin, and the supply lines and isolation valves underneath, then confirm which new fittings suit the sink before you order.
- 3
Sign off the quote
You'll see a fixed quote before any work starts, with flat-rate pricing and no hidden fees. The job starts when you're happy with it.
- 4
Pay once it's done
Pay by card or EFTPOS on site after the work's finished, or choose Fix now, pay later.
Plumbing job in Bald Hills?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Questions From Bald Hills
Call (07) 3523 6417Can I buy my own tap and have a plumber fit it?
Yes, provided the tap you buy shows the WaterMark trademark and a WELS star rating on its listing. WaterMark certification is what lets a licensed plumber fit the tap lawfully in Queensland. Ask the seller for the licence and registration numbers before you pay.
Can a tap be added or moved to a new spot?
Yes. A fixture added or shifted in an existing building counts as notifiable work, so a licensed plumber does the job and lodges a Form 4 with the QBCC inside 10 business days of finishing. No council permit applies.
What is the tap flow limit for rentals in Bald Hills?
Queensland tenancy rules cap internal cold water taps and single mixer taps in a rental at 9 litres per minute. Only then may an owner pass the full water bill to the tenant. The cap applies to basin, kitchen and laundry trough taps, not bathtub, garden or appliance taps.
Do taps in Queensland homes need a minimum WELS rating?
Yes, every tap on sale carries WELS registration with its star rating and water use displayed. Business Queensland sets a 3-star minimum for tap fittings and states the requirements do not apply to renovations.
What should a replacement tap match on my Bald Hills sink?
The new tap has to suit the number and size of the holes, the deck or wall mounting, and the supply connections underneath. The plumber inspects the old fitting before you settle on a replacement.
Call Us About the New TapWe'll call you back.
Ring (07) 3523 6417 and tell us what's wrong. You get $0 call-out fees, a fixed quote before any work starts and same-day where we can, 7 days a week.
Garden and hose taps get their own treatment on the outdoor tap repairs page.
To claim your $0 call-out fee, call (07) 3523 6417 today.